Easy Way To Build A Patio Cover

When you are building a patio cover off of an existing roof or wall you must take all of your measurements from the point at which the patio roof will attach to the existing structure not the outside of the slab.

Easy way to build a patio cover. The roof will be constructed using Multi-Core Galvalume metal roofing. If using limestone paver base use a garden hose to lightly wet the material. You can even experiment with multiple fabrics colors and configurations to ensure you have the most original and unique patio cover on the block.

The new patio cover will be built using Western Red Cedar 4x6 posts 4x6 beams and 2x6 rafters of course you can use Pressure Treated Pine Redwood or any other suitable framing material to build your patio. Use a tamper or a rented plate compactor to create a firm base. 11 ten-foot long 2x6s.

Patio Cover Plans - Building. Place the four pieces together in a rectangle to form the frame for the porch covering. With help from her family Stacy spread out gravel and sand first as a base then laid a broad range of stone pavers.

4 Install Galvanized Steel Panels. Continue to 2 of 10 below. A wooden pergola is essentially the base for any other patio cover.

AP Design House weatherproofed this patio by adding Bermuda shutters and laying galvanized steel corrugated panels overhead. Do the same to. A fantastic DIY wood planter and glowing string lights soften the homes brick siding and add to the crisp clean look.

I had to cut an angle and a 12 notch at the top ends so the roof of the patio cover would come in below the houses drip edge. Then it was time to get the frame which weighed about 300 pounds at this point ready to be raised. Building a Patio Cover - A Free-Standing Example Overview.